Alloy Wheel Refurbishment



Renovating alloy wheels. Although alloy wheels look much better than your typical metal wheel they require a lot more looking after. Wind, rain and grit can hit the surface of the alloys, brake dust can also go into the top to ruin your alloy wheels. If untreated the wheels could begin to corrode as well as your wheels could look duller than steel wheels with wheel trims. Just somewhat scuffing the kerb can give your alloys a tough looking edge.

There are two ways of refurbishing alloy wheels. One way would be to let the professionals do it, or if the damage is only decorative the repairs can be carried out at home with a few http://www.mintalloys.co.uk/ tools and a bit of elbow grease. The first job would be to hide up the tyres and any painted regions with paper and masking tape on areas you don't want to be impacted. Most alloy wheels have a lacquer finish and this lacquer will generally have to removed first. Then the remainder of the lacquer can be taken off with some kind of paint stripper. Take the normal precautions to prevent the stripper coming into contact with the skin. Use some body rubbing compound with a damp cloth to disguise any little pitted areas, once the lacquer has been removed. You will need to also use some fine grade wet and dry paper to get rid of any acute corrosion.

If there's any moderate impact destruction, then utilize a small grinding rock, a metal brush or perhaps a flap wheel on a drill to smooth this out. Take away the minimum number of metal potential and again you might need some rubbing compound once you have got the area looking reasonably smooth. The wheel will have to be polished, once most of the influence damage and corrosion has disappeared. Find an appropriate Alloy polish available from most good car accessory stores. Use lots of elbow grease as you can to get your wheels to as large a shine. Make use of a non-downy rag to put on the polish and then utilize a smooth material to buff it up. The next phase would be to give the wheels a re lacquer with clear coat lacquer making use of a narrow paint brush to utilize it. All should be available from most accessory stores along with your wheels should look as good as new.

Your Name:


Your Comment: